1980 BMW 628 vs. 2005 Daihatsu Move

To start off, 2005 Daihatsu Move is newer by 25 year(s). Which means there will be less support and parts availability for 1980 BMW 628. In addition, the cost of maintenance, including insurance, on 1980 BMW 628 would be higher. At 2,787 cc (6 cylinders), 1980 BMW 628 is equipped with a bigger engine. In terms of performance, 1980 BMW 628 (181 HP @ 6000 RPM) has 126 more horse power than 2005 Daihatsu Move. (55 HP @ 5200 RPM). In normal driving conditions, 1980 BMW 628 should accelerate faster than 2005 Daihatsu Move. With that said, vehicle weight also plays an important factor in acceleration. 1980 BMW 628 weights approximately 655 kg more than 2005 Daihatsu Move. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1980 BMW 628 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 BMW 628. However, in wet, icy, snow, or gravel driving conditions, 2005 Daihatsu Move, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 BMW 628 (240 Nm @ 4000 RPM) has 150 more torque (in Nm) than 2005 Daihatsu Move. (90 Nm @ 3600 RPM). This means 1980 BMW 628 will have an easier job in driving up hills or pulling heavy equipment than 2005 Daihatsu Move. 2005 Daihatsu Move has automatic transmission and 1980 BMW 628 has manual transmission. 1980 BMW 628 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Daihatsu Move will be easier to drive especially in heavy traffic.

Compare all specifications:

1980 BMW 628 2005 Daihatsu Move
Make BMW Daihatsu
Model 628 Move
Year Released 1980 2005
Engine Position Front Front
Engine Size 2787 cc 989 cc
Engine Cylinders 6 cylinders 3 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 181 HP 55 HP
Engine RPM 6000 RPM 5200 RPM
Torque 240 Nm 90 Nm
Torque RPM 4000 RPM 3600 RPM
Engine Compression Ratio 9.3:1 10.0:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 4 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1470 kg 815 kg
Vehicle Length 4760 mm 3320 mm
Vehicle Width 1730 mm 1410 mm
Vehicle Height 1370 mm 1700 mm
Wheelbase Size 2640 mm 2350 mm
Fuel Tank Capacity 70 L 37 L