1980 BMW 628 vs. 2006 Chrysler 300

To start off, 2006 Chrysler 300 is newer by 26 year(s). Which means there will be less support and parts availability for 1980 BMW 628. In addition, the cost of maintenance, including insurance, on 1980 BMW 628 would be higher. At 3,518 cc (6 cylinders), 2006 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2006 Chrysler 300 (246 HP @ 6400 RPM) has 65 more horse power than 1980 BMW 628. (181 HP @ 5800 RPM) In normal driving conditions, 2006 Chrysler 300 should accelerate faster than 1980 BMW 628. With that said, vehicle weight also plays an important factor in acceleration. 2006 Chrysler 300 weights approximately 245 kg more than 1980 BMW 628. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Chrysler 300 (340 Nm @ 3800 RPM) has 100 more torque (in Nm) than 1980 BMW 628. (240 Nm @ 4200 RPM). This means 2006 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1980 BMW 628. 2006 Chrysler 300 has automatic transmission and 1980 BMW 628 has manual transmission. 1980 BMW 628 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Chrysler 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

1980 BMW 628 2006 Chrysler 300
Make BMW Chrysler
Model 628 300
Year Released 1980 2006
Body Type Coupe Station Wagon
Engine Position Front Front
Engine Size 2786 cc 3518 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 181 HP 246 HP
Engine RPM 5800 RPM 6400 RPM
Torque 240 Nm 340 Nm
Torque RPM 4200 RPM 3800 RPM
Engine Bore Size 86 mm 96.1 mm
Engine Stroke Size 80 mm 81 mm
Engine Compression Ratio 9.3:1 10.0:1
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1460 kg 1705 kg
Vehicle Length 4760 mm 5020 mm
Vehicle Width 1730 mm 1890 mm
Vehicle Height 1370 mm 1480 mm
Wheelbase Size 2640 mm 3060 mm
Fuel Tank Capacity 70 L 68 L