1980 BMW 628 vs. 2008 Honda Fit

To start off, 2008 Honda Fit is newer by 28 year(s). Which means there will be less support and parts availability for 1980 BMW 628. In addition, the cost of maintenance, including insurance, on 1980 BMW 628 would be higher. At 2,787 cc (6 cylinders), 1980 BMW 628 is equipped with a bigger engine. In terms of performance, 1980 BMW 628 (181 HP @ 6000 RPM) has 72 more horse power than 2008 Honda Fit. (109 HP @ 5800 RPM). In normal driving conditions, 1980 BMW 628 should accelerate faster than 2008 Honda Fit. With that said, vehicle weight also plays an important factor in acceleration. 1980 BMW 628 weights approximately 290 kg more than 2008 Honda Fit. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1980 BMW 628 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 BMW 628. However, in wet, icy, snow, or gravel driving conditions, 2008 Honda Fit, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 BMW 628 (240 Nm @ 4000 RPM) has 98 more torque (in Nm) than 2008 Honda Fit. (142 Nm @ 4800 RPM). This means 1980 BMW 628 will have an easier job in driving up hills or pulling heavy equipment than 2008 Honda Fit. 2008 Honda Fit has automatic transmission and 1980 BMW 628 has manual transmission. 1980 BMW 628 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Honda Fit will be easier to drive especially in heavy traffic.

Compare all specifications:

1980 BMW 628 2008 Honda Fit
Make BMW Honda
Model 628 Fit
Year Released 1980 2008
Body Type Coupe Hatchback
Engine Position Front Front
Engine Size 2787 cc 1497 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 181 HP 109 HP
Engine RPM 6000 RPM 5800 RPM
Torque 240 Nm 142 Nm
Torque RPM 4000 RPM 4800 RPM
Engine Compression Ratio 9.3:1 10.4:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1470 kg 1180 kg
Vehicle Length 4760 mm 4000 mm
Vehicle Width 1730 mm 1690 mm
Vehicle Height 1370 mm 1530 mm
Wheelbase Size 2640 mm 2460 mm
Fuel Tank Capacity 70 L 41 L