1980 BMW 725 vs. 1967 Honda S600
To start off, 1980 BMW 725 is newer by 13 year(s). Which means there will be less support and parts availability for 1967 Honda S600. In addition, the cost of maintenance, including insurance, on 1967 Honda S600 would be higher. At 2,495 cc (6 cylinders), 1980 BMW 725 is equipped with a bigger engine. In terms of performance, 1980 BMW 725 (148 HP @ 5500 RPM) has 78 more horse power than 1967 Honda S600. (70 HP @ 8000 RPM). In normal driving conditions, 1980 BMW 725 should accelerate faster than 1967 Honda S600.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 BMW 725 (215 Nm @ 4000 RPM) has 149 more torque (in Nm) than 1967 Honda S600. (66 Nm @ 6000 RPM). This means 1980 BMW 725 will have an easier job in driving up hills or pulling heavy equipment than 1967 Honda S600.
Compare all specifications:
1980 BMW 725 | 1967 Honda S600 | |
Make | BMW | Honda |
Model | 725 | S600 |
Year Released | 1980 | 1967 |
Engine Position | Front | Front |
Engine Size | 2495 cc | 791 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 148 HP | 70 HP |
Engine RPM | 5500 RPM | 8000 RPM |
Torque | 215 Nm | 66 Nm |
Torque RPM | 4000 RPM | 6000 RPM |
Engine Bore Size | 86 mm | 60 mm |
Engine Stroke Size | 71.6 mm | 70 mm |
Engine Compression Ratio | 9.6:1 | 9.2:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Length | 4870 mm | 3340 mm |
Vehicle Width | 1810 mm | 1410 mm |
Vehicle Height | 1440 mm | 1230 mm |
Wheelbase Size | 2810 mm | 2010 mm |