1980 BMW 725 vs. 1989 Fiat Uno

To start off, 1989 Fiat Uno is newer by 9 year(s). Which means there will be less support and parts availability for 1980 BMW 725. In addition, the cost of maintenance, including insurance, on 1980 BMW 725 would be higher. At 2,495 cc (6 cylinders), 1980 BMW 725 is equipped with a bigger engine. In terms of performance, 1980 BMW 725 (148 HP @ 5500 RPM) has 104 more horse power than 1989 Fiat Uno. (44 HP @ 5600 RPM). In normal driving conditions, 1980 BMW 725 should accelerate faster than 1989 Fiat Uno.

Because 1980 BMW 725 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 BMW 725. However, in wet, icy, snow, or gravel driving conditions, 1989 Fiat Uno, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 BMW 725 (215 Nm @ 4000 RPM) has 148 more torque (in Nm) than 1989 Fiat Uno. (67 Nm @ 3000 RPM). This means 1980 BMW 725 will have an easier job in driving up hills or pulling heavy equipment than 1989 Fiat Uno.

Compare all specifications:

1980 BMW 725 1989 Fiat Uno
Make BMW Fiat
Model 725 Uno
Year Released 1980 1989
Body Type Sedan Hatchback
Engine Position Front Front
Engine Size 2495 cc 903 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 148 HP 44 HP
Engine RPM 5500 RPM 5600 RPM
Torque 215 Nm 67 Nm
Torque RPM 4000 RPM 3000 RPM
Engine Bore Size 86 mm 65 mm
Engine Stroke Size 71.6 mm 68 mm
Engine Compression Ratio 9.6:1 9.0:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 3 doors
Vehicle Length 4870 mm 3650 mm
Vehicle Width 1810 mm 1560 mm
Vehicle Height 1440 mm 1430 mm
Wheelbase Size 2810 mm 2370 mm