1980 BMW 725 vs. 2006 BMW 320
To start off, 2006 BMW 320 is newer by 26 year(s). Which means there will be less support and parts availability for 1980 BMW 725. In addition, the cost of maintenance, including insurance, on 1980 BMW 725 would be higher. At 2,495 cc (6 cylinders), 1980 BMW 725 is equipped with a bigger engine. In terms of performance, both vehicles can yield 148 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 BMW 320 (330 Nm @ 2000 RPM) has 115 more torque (in Nm) than 1980 BMW 725. (215 Nm @ 4000 RPM). This means 2006 BMW 320 will have an easier job in driving up hills or pulling heavy equipment than 1980 BMW 725.
Compare all specifications:
1980 BMW 725 | 2006 BMW 320 | |
Make | BMW | BMW |
Model | 725 | 320 |
Year Released | 1980 | 2006 |
Body Type | Sedan | Station Wagon |
Engine Position | Front | Front |
Engine Size | 2495 cc | 1994 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 148 HP | 148 HP |
Engine RPM | 5500 RPM | 4000 RPM |
Torque | 215 Nm | 330 Nm |
Torque RPM | 4000 RPM | 2000 RPM |
Engine Bore Size | 86 mm | 84 mm |
Engine Stroke Size | 71.6 mm | 90 mm |
Engine Compression Ratio | 9.6:1 | 17.0:1 |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | Rear |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Length | 4870 mm | 4480 mm |
Vehicle Width | 1810 mm | 1750 mm |
Vehicle Height | 1440 mm | 1420 mm |
Wheelbase Size | 2810 mm | 2730 mm |