1980 Buick LeSabre vs. 1965 Innocenti J4

To start off, 1980 Buick LeSabre is newer by 15 year(s). Which means there will be less support and parts availability for 1965 Innocenti J4. In addition, the cost of maintenance, including insurance, on 1965 Innocenti J4 would be higher. At 4,129 cc (6 cylinders), 1980 Buick LeSabre is equipped with a bigger engine. In terms of performance, 1980 Buick LeSabre (123 HP @ 4000 RPM) has 67 more horse power than 1965 Innocenti J4. (56 HP @ 5500 RPM). In normal driving conditions, 1980 Buick LeSabre should accelerate faster than 1965 Innocenti J4. With that said, vehicle weight also plays an important factor in acceleration. 1980 Buick LeSabre weights approximately 730 kg more than 1965 Innocenti J4. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1980 Buick LeSabre is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Buick LeSabre. However, in wet, icy, snow, or gravel driving conditions, 1965 Innocenti J4, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Buick LeSabre (279 Nm @ 2000 RPM) has 197 more torque (in Nm) than 1965 Innocenti J4. (82 Nm @ 2000 RPM). This means 1980 Buick LeSabre will have an easier job in driving up hills or pulling heavy equipment than 1965 Innocenti J4. 1980 Buick LeSabre has automatic transmission and 1965 Innocenti J4 has manual transmission. 1965 Innocenti J4 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Buick LeSabre will be easier to drive especially in heavy traffic.

Compare all specifications:

1980 Buick LeSabre 1965 Innocenti J4
Make Buick Innocenti
Model LeSabre J4
Year Released 1980 1965
Engine Position Front Front
Engine Size 4129 cc 1098 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 123 HP 56 HP
Engine RPM 4000 RPM 5500 RPM
Torque 279 Nm 82 Nm
Torque RPM 2000 RPM 2000 RPM
Engine Bore Size 100.7 mm 64.6 mm
Engine Stroke Size 86.4 mm 83.7 mm
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Vehicle Weight 1580 kg 850 kg
Vehicle Length 5550 mm 3720 mm
Vehicle Width 1910 mm 1540 mm
Vehicle Height 1430 mm 1380 mm
Wheelbase Size 2950 mm 2380 mm