1980 Chrysler 160 vs. 1985 Lada Niva
To start off, 1985 Lada Niva is newer by 5 year(s). Which means there will be less support and parts availability for 1980 Chrysler 160. In addition, the cost of maintenance, including insurance, on 1980 Chrysler 160 would be higher. At 1,639 cc (4 cylinders), 1980 Chrysler 160 is equipped with a bigger engine. In terms of performance, 1980 Chrysler 160 (89 HP @ 5800 RPM) has 13 more horse power than 1985 Lada Niva. (76 HP @ 5600 RPM). In normal driving conditions, 1980 Chrysler 160 should accelerate faster than 1985 Lada Niva. With that said, vehicle weight also plays an important factor in acceleration. 1985 Lada Niva weights approximately 64 kg more than 1980 Chrysler 160.
Because 1985 Lada Niva is four wheel drive (4WD), it will have significant more traction and grip than 1980 Chrysler 160. In wet, icy, snow, or gravel driving conditions, 1985 Lada Niva will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Chrysler 160 (132 Nm @ 3400 RPM) has 22 more torque (in Nm) than 1985 Lada Niva. (110 Nm @ 3000 RPM). This means 1980 Chrysler 160 will have an easier job in driving up hills or pulling heavy equipment than 1985 Lada Niva.
Compare all specifications:
1980 Chrysler 160 | 1985 Lada Niva | |
Make | Chrysler | Lada |
Model | 160 | Niva |
Year Released | 1980 | 1985 |
Engine Position | Front | Front |
Engine Size | 1639 cc | 1452 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 89 HP | 76 HP |
Engine RPM | 5800 RPM | 5600 RPM |
Torque | 132 Nm | 110 Nm |
Torque RPM | 3400 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | 4WD |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 1086 kg | 1150 kg |
Vehicle Length | 4540 mm | 3730 mm |
Vehicle Width | 1730 mm | 1690 mm |
Vehicle Height | 1440 mm | 1650 mm |
Wheelbase Size | 2680 mm | 2210 mm |