1980 Chrysler 1609 vs. 2003 Suzuki Wagon R+

To start off, 2003 Suzuki Wagon R+ is newer by 23 year(s). Which means there will be less support and parts availability for 1980 Chrysler 1609. In addition, the cost of maintenance, including insurance, on 1980 Chrysler 1609 would be higher. At 1,812 cc (4 cylinders), 1980 Chrysler 1609 is equipped with a bigger engine. In terms of performance, 1980 Chrysler 1609 (101 HP @ 5800 RPM) has 26 more horse power than 2003 Suzuki Wagon R+. (75 HP @ 5500 RPM). In normal driving conditions, 1980 Chrysler 1609 should accelerate faster than 2003 Suzuki Wagon R+. With that said, vehicle weight also plays an important factor in acceleration. 1980 Chrysler 1609 weights approximately 125 kg more than 2003 Suzuki Wagon R+. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1980 Chrysler 1609 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Chrysler 1609. However, in wet, icy, snow, or gravel driving conditions, 2003 Suzuki Wagon R+, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Chrysler 1609 (144 Nm @ 3800 RPM) has 27 more torque (in Nm) than 2003 Suzuki Wagon R+. (117 Nm @ 4250 RPM). This means 1980 Chrysler 1609 will have an easier job in driving up hills or pulling heavy equipment than 2003 Suzuki Wagon R+. 2003 Suzuki Wagon R+ has automatic transmission and 1980 Chrysler 1609 has manual transmission. 1980 Chrysler 1609 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Suzuki Wagon R+ will be easier to drive especially in heavy traffic.

Compare all specifications:

1980 Chrysler 1609 2003 Suzuki Wagon R+
Make Chrysler Suzuki
Model 1609 Wagon R+
Year Released 1980 2003
Engine Position Front Front
Engine Size 1812 cc 1298 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 101 HP 75 HP
Engine RPM 5800 RPM 5500 RPM
Torque 144 Nm 117 Nm
Torque RPM 3800 RPM 4250 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 4 seats
Vehicle Weight 1100 kg 975 kg
Vehicle Length 4530 mm 3420 mm
Vehicle Width 1740 mm 1580 mm
Vehicle Height 1450 mm 1710 mm
Wheelbase Size 2670 mm 2340 mm