1980 Chrysler 1609 vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 30 year(s). Which means there will be less support and parts availability for 1980 Chrysler 1609. In addition, the cost of maintenance, including insurance, on 1980 Chrysler 1609 would be higher. At 2,360 cc (4 cylinders), 2010 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (173 HP @ 6000 RPM) has 72 more horse power than 1980 Chrysler 1609. (101 HP @ 5800 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 1980 Chrysler 1609. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 810 kg more than 1980 Chrysler 1609. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1980 Chrysler 1609 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Chrysler 1609. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring (225 Nm @ 4400 RPM) has 81 more torque (in Nm) than 1980 Chrysler 1609. (144 Nm @ 3800 RPM). This means 2010 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1980 Chrysler 1609. 2010 Chrysler Sebring has automatic transmission and 1980 Chrysler 1609 has manual transmission. 1980 Chrysler 1609 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1980 Chrysler 1609 | 2010 Chrysler Sebring | |
| Make | Chrysler | Chrysler |
| Model | 1609 | Sebring |
| Year Released | 1980 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 1812 cc | 2360 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 101 HP | 173 HP |
| Engine RPM | 5800 RPM | 6000 RPM |
| Torque | 144 Nm | 225 Nm |
| Torque RPM | 3800 RPM | 4400 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Vehicle Weight | 1100 kg | 1910 kg |
| Vehicle Length | 4530 mm | 4850 mm |
| Vehicle Width | 1740 mm | 1810 mm |
| Vehicle Height | 1450 mm | 1510 mm |
| Wheelbase Size | 2670 mm | 2770 mm |
