1980 Chrysler Avenger vs. 1950 Jeep CJ3A
To start off, 1980 Chrysler Avenger is newer by 30 year(s). Which means there will be less support and parts availability for 1950 Jeep CJ3A. In addition, the cost of maintenance, including insurance, on 1950 Jeep CJ3A would be higher. At 2,199 cc (4 cylinders), 1950 Jeep CJ3A is equipped with a bigger engine. In terms of performance, both vehicles can yield 59 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1950 Jeep CJ3A weights approximately 230 kg more than 1980 Chrysler Avenger.
Because 1950 Jeep CJ3A is four wheel drive (4WD), it will have significant more traction and grip than 1980 Chrysler Avenger. In wet, icy, snow, or gravel driving conditions, 1950 Jeep CJ3A will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1950 Jeep CJ3A (145 Nm @ 3600 RPM) has 52 more torque (in Nm) than 1980 Chrysler Avenger. (93 Nm @ 2600 RPM). This means 1950 Jeep CJ3A will have an easier job in driving up hills or pulling heavy equipment than 1980 Chrysler Avenger.
Compare all specifications:
1980 Chrysler Avenger | 1950 Jeep CJ3A | |
Make | Chrysler | Jeep |
Model | Avenger | CJ3A |
Year Released | 1980 | 1950 |
Engine Position | Front | Front |
Engine Size | 1295 cc | 2199 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 59 HP | 59 HP |
Engine RPM | 5000 RPM | 3600 RPM |
Torque | 93 Nm | 145 Nm |
Torque RPM | 2600 RPM | 3600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Manual |
Vehicle Weight | 880 kg | 1110 kg |
Vehicle Length | 4150 mm | 3130 mm |
Vehicle Width | 1620 mm | 1460 mm |
Vehicle Height | 1420 mm | 1630 mm |
Wheelbase Size | 2500 mm | 2040 mm |