1980 Chrysler Avenger vs. 1996 Acura RL

To start off, 1996 Acura RL is newer by 16 year(s). Which means there will be less support and parts availability for 1980 Chrysler Avenger. In addition, the cost of maintenance, including insurance, on 1980 Chrysler Avenger would be higher. At 3,472 cc (6 cylinders), 1996 Acura RL is equipped with a bigger engine. In terms of performance, 1996 Acura RL (205 HP @ 5200 RPM) has 146 more horse power than 1980 Chrysler Avenger. (59 HP @ 5000 RPM) In normal driving conditions, 1996 Acura RL should accelerate faster than 1980 Chrysler Avenger. With that said, vehicle weight also plays an important factor in acceleration. 1996 Acura RL weights approximately 795 kg more than 1980 Chrysler Avenger. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1980 Chrysler Avenger is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Chrysler Avenger. However, in wet, icy, snow, or gravel driving conditions, 1996 Acura RL, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Acura RL (304 Nm @ 2800 RPM) has 211 more torque (in Nm) than 1980 Chrysler Avenger. (93 Nm @ 2600 RPM). This means 1996 Acura RL will have an easier job in driving up hills or pulling heavy equipment than 1980 Chrysler Avenger. 1996 Acura RL has automatic transmission and 1980 Chrysler Avenger has manual transmission. 1980 Chrysler Avenger will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Acura RL will be easier to drive especially in heavy traffic.

Compare all specifications:

1980 Chrysler Avenger 1996 Acura RL
Make Chrysler Acura
Model Avenger RL
Year Released 1980 1996
Engine Position Front Front
Engine Size 1295 cc 3472 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Horse Power 59 HP 205 HP
Engine RPM 5000 RPM 5200 RPM
Torque 93 Nm 304 Nm
Torque RPM 2600 RPM 2800 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Vehicle Weight 880 kg 1675 kg
Vehicle Length 4150 mm 5000 mm
Vehicle Width 1620 mm 1820 mm
Vehicle Height 1420 mm 1440 mm
Wheelbase Size 2500 mm 2920 mm