1980 Daihatsu Delta vs. 1997 Ford Contour
To start off, 1997 Ford Contour is newer by 17 year(s). Which means there will be less support and parts availability for 1980 Daihatsu Delta. In addition, the cost of maintenance, including insurance, on 1980 Daihatsu Delta would be higher. At 2,544 cc (6 cylinders), 1997 Ford Contour is equipped with a bigger engine. In terms of performance, 1997 Ford Contour (168 HP @ 6250 RPM) has 76 more horse power than 1980 Daihatsu Delta. (92 HP @ 5000 RPM) In normal driving conditions, 1997 Ford Contour should accelerate faster than 1980 Daihatsu Delta. With that said, vehicle weight also plays an important factor in acceleration. 1997 Ford Contour weights approximately 229 kg more than 1980 Daihatsu Delta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1980 Daihatsu Delta is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Daihatsu Delta. However, in wet, icy, snow, or gravel driving conditions, 1997 Ford Contour, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1997 Ford Contour (220 Nm @ 4250 RPM) has 73 more torque (in Nm) than 1980 Daihatsu Delta. (147 Nm @ 3400 RPM). This means 1997 Ford Contour will have an easier job in driving up hills or pulling heavy equipment than 1980 Daihatsu Delta. 1997 Ford Contour has automatic transmission and 1980 Daihatsu Delta has manual transmission. 1980 Daihatsu Delta will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1997 Ford Contour will be easier to drive especially in heavy traffic.
Compare all specifications:
1980 Daihatsu Delta | 1997 Ford Contour | |
Make | Daihatsu | Ford |
Model | Delta | Contour |
Year Released | 1980 | 1997 |
Engine Position | Front | Front |
Engine Size | 1770 cc | 2544 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 92 HP | 168 HP |
Engine RPM | 5000 RPM | 6250 RPM |
Torque | 147 Nm | 220 Nm |
Torque RPM | 3400 RPM | 4250 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1085 kg | 1314 kg |
Vehicle Length | 4000 mm | 4680 mm |
Vehicle Width | 1660 mm | 1760 mm |
Vehicle Height | 1750 mm | 1400 mm |
Wheelbase Size | 2200 mm | 2710 mm |