1980 Daihatsu Taft vs. 1967 Lancia Fulvia
To start off, 1980 Daihatsu Taft is newer by 13 year(s). Which means there will be less support and parts availability for 1967 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1967 Lancia Fulvia would be higher. At 1,298 cc (4 cylinders), 1967 Lancia Fulvia is equipped with a bigger engine. In terms of performance, 1967 Lancia Fulvia (87 HP @ 6000 RPM) has 43 more horse power than 1980 Daihatsu Taft. (44 HP @ 5400 RPM) In normal driving conditions, 1967 Lancia Fulvia should accelerate faster than 1980 Daihatsu Taft. With that said, vehicle weight also plays an important factor in acceleration. 1980 Daihatsu Taft weights approximately 54 kg more than 1967 Lancia Fulvia.
Because 1980 Daihatsu Taft is four wheel drive (4WD), it will have significant more traction and grip than 1967 Lancia Fulvia. In wet, icy, snow, or gravel driving conditions, 1980 Daihatsu Taft will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1967 Lancia Fulvia (114 Nm @ 4500 RPM) has 51 more torque (in Nm) than 1980 Daihatsu Taft. (63 Nm @ 4200 RPM). This means 1967 Lancia Fulvia will have an easier job in driving up hills or pulling heavy equipment than 1980 Daihatsu Taft.
Compare all specifications:
1980 Daihatsu Taft | 1967 Lancia Fulvia | |
Make | Daihatsu | Lancia |
Model | Taft | Fulvia |
Year Released | 1980 | 1967 |
Engine Size | 956 cc | 1298 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | V |
Horse Power | 44 HP | 87 HP |
Engine RPM | 5400 RPM | 6000 RPM |
Torque | 63 Nm | 114 Nm |
Torque RPM | 4200 RPM | 4500 RPM |
Drive Type | 4WD | Front |
Vehicle Weight | 1020 kg | 966 kg |
Vehicle Length | 3370 mm | 4100 mm |
Vehicle Width | 1470 mm | 1580 mm |
Vehicle Height | 1830 mm | 1210 mm |
Wheelbase Size | 2030 mm | 2320 mm |