1980 Dodge Aspen vs. 2009 GMC Acadia

To start off, 2009 GMC Acadia is newer by 29 year(s). Which means there will be less support and parts availability for 1980 Dodge Aspen. In addition, the cost of maintenance, including insurance, on 1980 Dodge Aspen would be higher. At 3,687 cc (6 cylinders), 1980 Dodge Aspen is equipped with a bigger engine. In terms of performance, 2009 GMC Acadia (288 HP @ 6300 RPM) has 188 more horse power than 1980 Dodge Aspen. (100 HP @ 3600 RPM) In normal driving conditions, 2009 GMC Acadia should accelerate faster than 1980 Dodge Aspen. With that said, vehicle weight also plays an important factor in acceleration. 2009 GMC Acadia weights approximately 1128 kg more than 1980 Dodge Aspen. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2009 GMC Acadia is four wheel drive (4WD), it will have significant more traction and grip than 1980 Dodge Aspen. In wet, icy, snow, or gravel driving conditions, 2009 GMC Acadia will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 GMC Acadia (366 Nm @ 3400 RPM) has 134 more torque (in Nm) than 1980 Dodge Aspen. (232 Nm @ 1600 RPM). This means 2009 GMC Acadia will have an easier job in driving up hills or pulling heavy equipment than 1980 Dodge Aspen.

Compare all specifications:

1980 Dodge Aspen 2009 GMC Acadia
Make Dodge GMC
Model Aspen Acadia
Year Released 1980 2009
Engine Position Front Front
Engine Size 3687 cc 3599 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Horse Power 100 HP 288 HP
Engine RPM 3600 RPM 6300 RPM
Torque 232 Nm 366 Nm
Torque RPM 1600 RPM 3400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Number of Seats 5 seats 8 seats
Vehicle Weight 1485 kg 2613 kg
Vehicle Length 5200 mm 5100 mm
Vehicle Width 1840 mm 1990 mm
Vehicle Height 1410 mm 1780 mm
Wheelbase Size 2870 mm 3030 mm