1980 Dodge Omni vs. 2010 Ford Ka

To start off, 2010 Ford Ka is newer by 30 year(s). Which means there will be less support and parts availability for 1980 Dodge Omni. In addition, the cost of maintenance, including insurance, on 1980 Dodge Omni would be higher. At 1,715 cc (4 cylinders), 1980 Dodge Omni is equipped with a bigger engine. In terms of performance, 2010 Ford Ka (68 HP @ 5500 RPM) has 3 more horse power than 1980 Dodge Omni. (65 HP @ 5200 RPM) In normal driving conditions, 2010 Ford Ka should accelerate faster than 1980 Dodge Omni. With that said, vehicle weight also plays an important factor in acceleration. 1980 Dodge Omni weights approximately 113 kg more than 2010 Ford Ka.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Dodge Omni (115 Nm @ 2400 RPM) has 9 more torque (in Nm) than 2010 Ford Ka. (106 Nm @ 3000 RPM). This means 1980 Dodge Omni will have an easier job in driving up hills or pulling heavy equipment than 2010 Ford Ka.

Compare all specifications:

1980 Dodge Omni 2010 Ford Ka
Make Dodge Ford
Model Omni Ka
Year Released 1980 2010
Body Type Hatchback Hatchback
Engine Position Front Front
Engine Size 1715 cc 1297 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 65 HP 68 HP
Engine RPM 5200 RPM 5500 RPM
Torque 115 Nm 106 Nm
Torque RPM 2400 RPM 3000 RPM
Engine Bore Size 79.5 mm 74 mm
Engine Stroke Size 86.4 mm 75.5 mm
Engine Compression Ratio 8.2:1 10.2:1
Fuel Type Gasoline Gasoline
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 4 seats
Number of Doors 5 doors 3 doors
Vehicle Weight 1000 kg 887 kg
Vehicle Length 4200 mm 3630 mm
Vehicle Width 1680 mm 1830 mm
Vehicle Height 1360 mm 1360 mm
Wheelbase Size 2530 mm 2450 mm
Fuel Tank Capacity 53 L 40 L