1980 Ferrari 208 vs. 1965 Volvo P 210 Duett

To start off, 1980 Ferrari 208 is newer by 15 year(s). Which means there will be less support and parts availability for 1965 Volvo P 210 Duett. In addition, the cost of maintenance, including insurance, on 1965 Volvo P 210 Duett would be higher. At 1,991 cc (8 cylinders), 1980 Ferrari 208 is equipped with a bigger engine. In terms of performance, 1980 Ferrari 208 (153 HP) has 86 more horse power than 1965 Volvo P 210 Duett. (67 HP). In normal driving conditions, 1980 Ferrari 208 should accelerate faster than 1965 Volvo P 210 Duett. With that said, vehicle weight also plays an important factor in acceleration. 1980 Ferrari 208 weights approximately 90 kg more than 1965 Volvo P 210 Duett. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Ferrari 208 (171 Nm @ 3900 RPM) has 27 more torque (in Nm) than 1965 Volvo P 210 Duett. (144 Nm @ 2300 RPM). This means 1980 Ferrari 208 will have an easier job in driving up hills or pulling heavy equipment than 1965 Volvo P 210 Duett.

Compare all specifications:

1980 Ferrari 208 1965 Volvo P 210 Duett
Make Ferrari Volvo
Model 208 P 210 Duett
Year Released 1980 1965
Engine Position Middle Front
Engine Size 1991 cc 1778 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 153 HP 67 HP
Torque 171 Nm 144 Nm
Torque RPM 3900 RPM 2300 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 1305 kg 1215 kg
Vehicle Length 4240 mm 4410 mm
Vehicle Width 1730 mm 1610 mm
Vehicle Height 1130 mm 1710 mm
Wheelbase Size 2350 mm 2610 mm