1980 Ferrari 308 vs. 1999 Tata E220
To start off, 1999 Tata E220 is newer by 19 year(s). Which means there will be less support and parts availability for 1980 Ferrari 308. In addition, the cost of maintenance, including insurance, on 1980 Ferrari 308 would be higher. At 2,927 cc (8 cylinders), 1980 Ferrari 308 is equipped with a bigger engine. In terms of performance, 1980 Ferrari 308 (240 HP @ 7000 RPM) has 92 more horse power than 1999 Tata E220. (148 HP @ 5500 RPM). In normal driving conditions, 1980 Ferrari 308 should accelerate faster than 1999 Tata E220. With that said, vehicle weight also plays an important factor in acceleration. 1999 Tata E220 weights approximately 90 kg more than 1980 Ferrari 308.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Ferrari 308 (260 Nm @ 5000 RPM) has 50 more torque (in Nm) than 1999 Tata E220. (210 Nm @ 4000 RPM). This means 1980 Ferrari 308 will have an easier job in driving up hills or pulling heavy equipment than 1999 Tata E220.
Compare all specifications:
| 1980 Ferrari 308 | 1999 Tata E220 | |
| Make | Ferrari | Tata |
| Model | 308 | E220 |
| Year Released | 1980 | 1999 |
| Engine Position | Middle | Front |
| Engine Size | 2927 cc | 2199 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Horse Power | 240 HP | 148 HP |
| Engine RPM | 7000 RPM | 5500 RPM |
| Torque | 260 Nm | 210 Nm |
| Torque RPM | 5000 RPM | 4000 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 1284 kg | 1374 kg |
| Vehicle Length | 4240 mm | 4750 mm |
| Vehicle Width | 1730 mm | 1750 mm |
| Vehicle Height | 1130 mm | 1440 mm |
| Wheelbase Size | 2350 mm | 2810 mm |
