1980 Ferrari Pinin vs. 1975 Datsun 280Z
To start off, 1980 Ferrari Pinin is newer by 5 year(s). Which means there will be less support and parts availability for 1975 Datsun 280Z. In addition, the cost of maintenance, including insurance, on 1975 Datsun 280Z would be higher. At 4,942 cc (12 cylinders), 1980 Ferrari Pinin is equipped with a bigger engine. In terms of performance, 1980 Ferrari Pinin (355 HP @ 6200 RPM) has 205 more horse power than 1975 Datsun 280Z. (150 HP @ 5600 RPM). In normal driving conditions, 1980 Ferrari Pinin should accelerate faster than 1975 Datsun 280Z. With that said, vehicle weight also plays an important factor in acceleration. 1980 Ferrari Pinin weights approximately 526 kg more than 1975 Datsun 280Z. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Ferrari Pinin (459 Nm @ 4600 RPM) has 238 more torque (in Nm) than 1975 Datsun 280Z. (221 Nm @ 4400 RPM). This means 1980 Ferrari Pinin will have an easier job in driving up hills or pulling heavy equipment than 1975 Datsun 280Z. 1975 Datsun 280Z has automatic transmission and 1980 Ferrari Pinin has manual transmission. 1980 Ferrari Pinin will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1975 Datsun 280Z will be easier to drive especially in heavy traffic.
Compare all specifications:
1980 Ferrari Pinin | 1975 Datsun 280Z | |
Make | Ferrari | Datsun |
Model | Pinin | 280Z |
Year Released | 1980 | 1975 |
Engine Position | Front | Front |
Engine Size | 4942 cc | 2753 cc |
Engine Cylinders | 12 cylinders | 6 cylinders |
Engine Type | V | in-line |
Horse Power | 355 HP | 150 HP |
Engine RPM | 6200 RPM | 5600 RPM |
Torque | 459 Nm | 221 Nm |
Torque RPM | 4600 RPM | 4400 RPM |
Engine Bore Size | 82 mm | 86.1 mm |
Engine Stroke Size | 78 mm | 79 mm |
Engine Compression Ratio | 8.8:1 | 8.3:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 3 doors |
Vehicle Weight | 1830 kg | 1304 kg |
Vehicle Length | 4830 mm | 4399 mm |
Wheelbase Size | 2760 mm | 2304 mm |