1980 Fiat 127 vs. 1996 Kia Capital
To start off, 1996 Kia Capital is newer by 16 year(s). Which means there will be less support and parts availability for 1980 Fiat 127. In addition, the cost of maintenance, including insurance, on 1980 Fiat 127 would be higher. At 1,498 cc (4 cylinders), 1996 Kia Capital is equipped with a bigger engine. In terms of performance, 1996 Kia Capital (114 HP @ 6500 RPM) has 70 more horse power than 1980 Fiat 127. (44 HP @ 5600 RPM) In normal driving conditions, 1996 Kia Capital should accelerate faster than 1980 Fiat 127. With that said, vehicle weight also plays an important factor in acceleration. 1996 Kia Capital weights approximately 620 kg more than 1980 Fiat 127. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Kia Capital (152 Nm @ 4800 RPM) has 88 more torque (in Nm) than 1980 Fiat 127. (64 Nm @ 3000 RPM). This means 1996 Kia Capital will have an easier job in driving up hills or pulling heavy equipment than 1980 Fiat 127.
Compare all specifications:
1980 Fiat 127 | 1996 Kia Capital | |
Make | Fiat | Kia |
Model | 127 | Capital |
Year Released | 1980 | 1996 |
Engine Position | Front | Front |
Engine Size | 901 cc | 1498 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 44 HP | 114 HP |
Engine RPM | 5600 RPM | 6500 RPM |
Torque | 64 Nm | 152 Nm |
Torque RPM | 3000 RPM | 4800 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Vehicle Weight | 705 kg | 1325 kg |
Vehicle Length | 3650 mm | 4440 mm |
Vehicle Width | 1530 mm | 1710 mm |
Vehicle Height | 1370 mm | 1410 mm |
Wheelbase Size | 2230 mm | 2530 mm |