1980 Fiat 131 vs. 1956 Isuzu Minx
To start off, 1980 Fiat 131 is newer by 24 year(s). Which means there will be less support and parts availability for 1956 Isuzu Minx. In addition, the cost of maintenance, including insurance, on 1956 Isuzu Minx would be higher. At 1,390 cc (4 cylinders), 1956 Isuzu Minx is equipped with a bigger engine. In terms of performance, 1980 Fiat 131 (53 HP) has 8 more horse power than 1956 Isuzu Minx. (45 HP). In normal driving conditions, 1980 Fiat 131 should accelerate faster than 1956 Isuzu Minx. With that said, vehicle weight also plays an important factor in acceleration. 1980 Fiat 131 weights approximately 16 kg more than 1956 Isuzu Minx. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Fiat 131 (94 Nm @ 2700 RPM) has 3 more torque (in Nm) than 1956 Isuzu Minx. (91 Nm @ 2400 RPM). This means 1980 Fiat 131 will have an easier job in driving up hills or pulling heavy equipment than 1956 Isuzu Minx.
Compare all specifications:
1980 Fiat 131 | 1956 Isuzu Minx | |
Make | Fiat | Isuzu |
Model | 131 | Minx |
Year Released | 1980 | 1956 |
Engine Position | Front | Front |
Engine Size | 1297 cc | 1390 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 53 HP | 45 HP |
Torque | 94 Nm | 91 Nm |
Torque RPM | 2700 RPM | 2400 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 966 kg | 950 kg |
Vehicle Length | 4270 mm | 4080 mm |
Vehicle Width | 1660 mm | 1560 mm |
Vehicle Height | 1370 mm | 1520 mm |
Wheelbase Size | 2500 mm | 2440 mm |