1980 Ford Crown Victoria vs. 2010 Mazda 2
To start off, 2010 Mazda 2 is newer by 30 year(s). Which means there will be less support and parts availability for 1980 Ford Crown Victoria. In addition, the cost of maintenance, including insurance, on 1980 Ford Crown Victoria would be higher. At 4,186 cc (8 cylinders), 1980 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 1980 Ford Crown Victoria (118 HP @ 3800 RPM) has 44 more horse power than 2010 Mazda 2. (74 HP @ 5200 RPM). In normal driving conditions, 1980 Ford Crown Victoria should accelerate faster than 2010 Mazda 2. With that said, vehicle weight also plays an important factor in acceleration. 1980 Ford Crown Victoria weights approximately 505 kg more than 2010 Mazda 2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1980 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 2010 Mazda 2, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Ford Crown Victoria (262 Nm @ 2200 RPM) has 152 more torque (in Nm) than 2010 Mazda 2. (110 Nm @ 4000 RPM). This means 1980 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 2010 Mazda 2. 1980 Ford Crown Victoria has automatic transmission and 2010 Mazda 2 has manual transmission. 2010 Mazda 2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1980 Ford Crown Victoria | 2010 Mazda 2 | |
| Make | Ford | Mazda |
| Model | Crown Victoria | 2 |
| Year Released | 1980 | 2010 |
| Body Type | Sedan | Hatchback |
| Engine Position | Front | Front |
| Engine Size | 4186 cc | 1242 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 118 HP | 74 HP |
| Engine RPM | 3800 RPM | 5200 RPM |
| Torque | 262 Nm | 110 Nm |
| Torque RPM | 2200 RPM | 4000 RPM |
| Fuel Type | Gasoline | Gasoline - Premium |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 5 doors |
| Vehicle Weight | 1630 kg | 1125 kg |
| Vehicle Length | 5320 mm | 3930 mm |
| Vehicle Width | 1980 mm | 1690 mm |
| Vehicle Height | 1390 mm | 1550 mm |
| Wheelbase Size | 2910 mm | 2500 mm |
