1980 Holden Commodore vs. 1999 Peugeot 607
To start off, 1999 Peugeot 607 is newer by 19 year(s). Which means there will be less support and parts availability for 1980 Holden Commodore. In addition, the cost of maintenance, including insurance, on 1980 Holden Commodore would be higher. At 2,838 cc (6 cylinders), 1980 Holden Commodore is equipped with a bigger engine. In terms of performance, 1999 Peugeot 607 (131 HP @ 4000 RPM) has 29 more horse power than 1980 Holden Commodore. (102 HP @ 4400 RPM) In normal driving conditions, 1999 Peugeot 607 should accelerate faster than 1980 Holden Commodore. With that said, vehicle weight also plays an important factor in acceleration. 1999 Peugeot 607 weights approximately 310 kg more than 1980 Holden Commodore. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1980 Holden Commodore is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Holden Commodore. However, in wet, icy, snow, or gravel driving conditions, 1999 Peugeot 607, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1999 Peugeot 607 (317 Nm @ 2000 RPM) has 125 more torque (in Nm) than 1980 Holden Commodore. (192 Nm @ 2800 RPM). This means 1999 Peugeot 607 will have an easier job in driving up hills or pulling heavy equipment than 1980 Holden Commodore. 1999 Peugeot 607 has automatic transmission and 1980 Holden Commodore has manual transmission. 1980 Holden Commodore will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1999 Peugeot 607 will be easier to drive especially in heavy traffic.
Compare all specifications:
1980 Holden Commodore | 1999 Peugeot 607 | |
Make | Holden | Peugeot |
Model | Commodore | 607 |
Year Released | 1980 | 1999 |
Body Type | Sedan | Sedan |
Engine Position | Front | Front |
Engine Size | 2838 cc | 2304 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 102 HP | 131 HP |
Engine RPM | 4400 RPM | 4000 RPM |
Torque | 192 Nm | 317 Nm |
Torque RPM | 2800 RPM | 2000 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1220 kg | 1530 kg |
Vehicle Length | 4710 mm | 4880 mm |
Vehicle Width | 1730 mm | 1840 mm |
Vehicle Height | 1380 mm | 1470 mm |
Wheelbase Size | 2670 mm | 2810 mm |