1980 Holden Statesman vs. 2000 Mazda 323

To start off, 2000 Mazda 323 is newer by 20 year(s). Which means there will be less support and parts availability for 1980 Holden Statesman. In addition, the cost of maintenance, including insurance, on 1980 Holden Statesman would be higher. At 5,042 cc (8 cylinders), 1980 Holden Statesman is equipped with a bigger engine. In terms of performance, 1980 Holden Statesman (169 HP) has 95 more horse power than 2000 Mazda 323. (74 HP). In normal driving conditions, 1980 Holden Statesman should accelerate faster than 2000 Mazda 323. With that said, vehicle weight also plays an important factor in acceleration. 1980 Holden Statesman weights approximately 575 kg more than 2000 Mazda 323. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1980 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 2000 Mazda 323, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Holden Statesman (361 Nm @ 2800 RPM) has 252 more torque (in Nm) than 2000 Mazda 323. (109 Nm @ 4000 RPM). This means 1980 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 2000 Mazda 323. 1980 Holden Statesman has automatic transmission and 2000 Mazda 323 has manual transmission. 2000 Mazda 323 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Holden Statesman will be easier to drive especially in heavy traffic.

Compare all specifications:

1980 Holden Statesman 2000 Mazda 323
Make Holden Mazda
Model Statesman 323
Year Released 1980 2000
Engine Position Front Front
Engine Size 5042 cc 1324 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 169 HP 74 HP
Torque 361 Nm 109 Nm
Torque RPM 2800 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Automatic Manual
Vehicle Weight 1722 kg 1147 kg
Vehicle Length 5160 mm 4210 mm
Vehicle Width 1910 mm 1710 mm
Vehicle Height 1410 mm 1420 mm
Wheelbase Size 2900 mm 2850 mm