1980 Honda Ballade vs. 1965 Morris Traveller
To start off, 1980 Honda Ballade is newer by 15 year(s). Which means there will be less support and parts availability for 1965 Morris Traveller. In addition, the cost of maintenance, including insurance, on 1965 Morris Traveller would be higher. At 1,335 cc (4 cylinders), 1980 Honda Ballade is equipped with a bigger engine. In terms of performance, 1980 Honda Ballade (67 HP) has 20 more horse power than 1965 Morris Traveller. (47 HP). In normal driving conditions, 1980 Honda Ballade should accelerate faster than 1965 Morris Traveller. With that said, vehicle weight also plays an important factor in acceleration. 1965 Morris Traveller weights approximately 44 kg more than 1980 Honda Ballade.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Honda Ballade (108 Nm @ 3000 RPM) has 27 more torque (in Nm) than 1965 Morris Traveller. (81 Nm @ 2500 RPM). This means 1980 Honda Ballade will have an easier job in driving up hills or pulling heavy equipment than 1965 Morris Traveller.
Compare all specifications:
1980 Honda Ballade | 1965 Morris Traveller | |
Make | Honda | Morris |
Model | Ballade | Traveller |
Year Released | 1980 | 1965 |
Engine Position | Front | Front |
Engine Size | 1335 cc | 1098 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 3 valves | 2 valves |
Horse Power | 67 HP | 47 HP |
Torque | 108 Nm | 81 Nm |
Torque RPM | 3000 RPM | 2500 RPM |
Engine Bore Size | 72 mm | 64.6 mm |
Engine Stroke Size | 82 mm | 83.7 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Vehicle Weight | 786 kg | 830 kg |
Vehicle Length | 4150 mm | 3730 mm |
Vehicle Width | 1610 mm | 1540 mm |
Vehicle Height | 1350 mm | 1350 mm |
Wheelbase Size | 2330 mm | 2380 mm |