1980 Honda Ballade vs. 1973 Subaru Leone
To start off, 1980 Honda Ballade is newer by 7 year(s). Which means there will be less support and parts availability for 1973 Subaru Leone. In addition, the cost of maintenance, including insurance, on 1973 Subaru Leone would be higher. At 1,335 cc (4 cylinders), 1980 Honda Ballade is equipped with a bigger engine. In terms of performance, 1980 Honda Ballade (67 HP) has 15 more horse power than 1973 Subaru Leone. (52 HP). In normal driving conditions, 1980 Honda Ballade should accelerate faster than 1973 Subaru Leone. With that said, vehicle weight also plays an important factor in acceleration. 1980 Honda Ballade weights approximately 11 kg more than 1973 Subaru Leone. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Honda Ballade (108 Nm @ 3000 RPM) has 23 more torque (in Nm) than 1973 Subaru Leone. (85 Nm @ 3200 RPM). This means 1980 Honda Ballade will have an easier job in driving up hills or pulling heavy equipment than 1973 Subaru Leone.
Compare all specifications:
1980 Honda Ballade | 1973 Subaru Leone | |
Make | Honda | Subaru |
Model | Ballade | Leone |
Year Released | 1980 | 1973 |
Engine Position | Front | Front |
Engine Size | 1335 cc | 1088 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 67 HP | 52 HP |
Torque | 108 Nm | 85 Nm |
Torque RPM | 3000 RPM | 3200 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Vehicle Weight | 786 kg | 775 kg |
Vehicle Length | 4150 mm | 4000 mm |
Vehicle Width | 1610 mm | 1510 mm |
Vehicle Height | 1350 mm | 1390 mm |
Wheelbase Size | 2330 mm | 2450 mm |