1980 Lancia Trevi vs. 1991 Mercedes-Benz 600

To start off, 1991 Mercedes-Benz 600 is newer by 11 year(s). Which means there will be less support and parts availability for 1980 Lancia Trevi. In addition, the cost of maintenance, including insurance, on 1980 Lancia Trevi would be higher. At 5,987 cc (12 cylinders), 1991 Mercedes-Benz 600 is equipped with a bigger engine. In terms of performance, 1991 Mercedes-Benz 600 (408 HP @ 5200 RPM) has 308 more horse power than 1980 Lancia Trevi. (100 HP @ 5800 RPM) In normal driving conditions, 1991 Mercedes-Benz 600 should accelerate faster than 1980 Lancia Trevi. With that said, vehicle weight also plays an important factor in acceleration. 1991 Mercedes-Benz 600 weights approximately 1085 kg more than 1980 Lancia Trevi. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1991 Mercedes-Benz 600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1991 Mercedes-Benz 600. However, in wet, icy, snow, or gravel driving conditions, 1980 Lancia Trevi, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Mercedes-Benz 600 (580 Nm @ 3800 RPM) has 445 more torque (in Nm) than 1980 Lancia Trevi. (135 Nm @ 3000 RPM). This means 1991 Mercedes-Benz 600 will have an easier job in driving up hills or pulling heavy equipment than 1980 Lancia Trevi. 1991 Mercedes-Benz 600 has automatic transmission and 1980 Lancia Trevi has manual transmission. 1980 Lancia Trevi will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1991 Mercedes-Benz 600 will be easier to drive especially in heavy traffic.

Compare all specifications:

1980 Lancia Trevi 1991 Mercedes-Benz 600
Make Lancia Mercedes-Benz
Model Trevi 600
Year Released 1980 1991
Engine Position Front Front
Engine Size 1585 cc 5987 cc
Engine Cylinders 4 cylinders 12 cylinders
Engine Type in-line V
Horse Power 100 HP 408 HP
Engine RPM 5800 RPM 5200 RPM
Torque 135 Nm 580 Nm
Torque RPM 3000 RPM 3800 RPM
Engine Bore Size 84 mm 89.1 mm
Engine Stroke Size 71.5 mm 80.2 mm
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1145 kg 2230 kg
Vehicle Length 4330 mm 5220 mm
Vehicle Width 1720 mm 1890 mm
Vehicle Height 1410 mm 1500 mm
Wheelbase Size 2550 mm 3150 mm
Fuel Tank Capacity 52 L 100 L