1980 Lancia Trevi vs. 1996 Mercedes-Benz E
To start off, 1996 Mercedes-Benz E is newer by 16 year(s). Which means there will be less support and parts availability for 1980 Lancia Trevi. In addition, the cost of maintenance, including insurance, on 1980 Lancia Trevi would be higher. At 4,973 cc (8 cylinders), 1996 Mercedes-Benz E is equipped with a bigger engine. In terms of performance, 1996 Mercedes-Benz E (343 HP @ 5750 RPM) has 227 more horse power than 1980 Lancia Trevi. (116 HP @ 5500 RPM) In normal driving conditions, 1996 Mercedes-Benz E should accelerate faster than 1980 Lancia Trevi. With that said, vehicle weight also plays an important factor in acceleration. 1996 Mercedes-Benz E weights approximately 511 kg more than 1980 Lancia Trevi. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1996 Mercedes-Benz E is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 Mercedes-Benz E. However, in wet, icy, snow, or gravel driving conditions, 1980 Lancia Trevi, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Mercedes-Benz E (480 Nm @ 3750 RPM) has 304 more torque (in Nm) than 1980 Lancia Trevi. (176 Nm @ 2800 RPM). This means 1996 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 1980 Lancia Trevi. 1996 Mercedes-Benz E has automatic transmission and 1980 Lancia Trevi has manual transmission. 1980 Lancia Trevi will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Mercedes-Benz E will be easier to drive especially in heavy traffic.
Compare all specifications:
1980 Lancia Trevi | 1996 Mercedes-Benz E | |
Make | Lancia | Mercedes-Benz |
Model | Trevi | E |
Year Released | 1980 | 1996 |
Body Type | Sedan | Sedan |
Engine Position | Front | Front |
Engine Size | 1994 cc | 4973 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Horse Power | 116 HP | 343 HP |
Engine RPM | 5500 RPM | 5750 RPM |
Torque | 176 Nm | 480 Nm |
Torque RPM | 2800 RPM | 3750 RPM |
Engine Bore Size | 84 mm | 96.5 mm |
Engine Stroke Size | 90 mm | 85 mm |
Engine Compression Ratio | 8.9:1 | 11.0:1 |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 5 doors | 4 doors |
Vehicle Weight | 1165 kg | 1676 kg |
Vehicle Length | 4360 mm | 4800 mm |
Vehicle Width | 1710 mm | 1810 mm |
Vehicle Height | 1410 mm | 1420 mm |
Wheelbase Size | 2550 mm | 2840 mm |
Fuel Tank Capacity | 52 L | 80 L |