1980 Lancia Trevi vs. 2012 Mercedes-Benz CL

To start off, 2012 Mercedes-Benz CL is newer by 32 year(s). Which means there will be less support and parts availability for 1980 Lancia Trevi. In addition, the cost of maintenance, including insurance, on 1980 Lancia Trevi would be higher. At 5,500 cc (8 cylinders), 2012 Mercedes-Benz CL is equipped with a bigger engine. In terms of performance, 2012 Mercedes-Benz CL (536 HP @ 5500 RPM) has 436 more horse power than 1980 Lancia Trevi. (100 HP @ 5800 RPM) In normal driving conditions, 2012 Mercedes-Benz CL should accelerate faster than 1980 Lancia Trevi. With that said, vehicle weight also plays an important factor in acceleration. 2012 Mercedes-Benz CL weights approximately 1035 kg more than 1980 Lancia Trevi. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2012 Mercedes-Benz CL is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2012 Mercedes-Benz CL. However, in wet, icy, snow, or gravel driving conditions, 1980 Lancia Trevi, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Mercedes-Benz CL (799 Nm @ 2000 RPM) has 664 more torque (in Nm) than 1980 Lancia Trevi. (135 Nm @ 3000 RPM). This means 2012 Mercedes-Benz CL will have an easier job in driving up hills or pulling heavy equipment than 1980 Lancia Trevi. 2012 Mercedes-Benz CL has automatic transmission and 1980 Lancia Trevi has manual transmission. 1980 Lancia Trevi will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Mercedes-Benz CL will be easier to drive especially in heavy traffic.

Compare all specifications:

1980 Lancia Trevi 2012 Mercedes-Benz CL
Make Lancia Mercedes-Benz
Model Trevi CL
Year Released 1980 2012
Body Type Sedan Coupe
Engine Position Front Front
Engine Size 1585 cc 5500 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Horse Power 100 HP 536 HP
Engine RPM 5800 RPM 5500 RPM
Torque 135 Nm 799 Nm
Torque RPM 3000 RPM 2000 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual 7-speed shiftable automatic
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1145 kg 2180 kg
Vehicle Length 4330 mm 5105 mm
Vehicle Width 1720 mm 1872 mm
Vehicle Height 1410 mm 1427 mm
Wheelbase Size 2550 mm 2954 mm
Fuel Tank Capacity 52 L 90 L