1980 Mercedes-Benz 500 vs. 1992 Peugeot 405
To start off, 1992 Peugeot 405 is newer by 12 year(s). Which means there will be less support and parts availability for 1980 Mercedes-Benz 500. In addition, the cost of maintenance, including insurance, on 1980 Mercedes-Benz 500 would be higher. At 4,972 cc (8 cylinders), 1980 Mercedes-Benz 500 is equipped with a bigger engine. In terms of performance, 1980 Mercedes-Benz 500 (237 HP @ 5000 RPM) has 117 more horse power than 1992 Peugeot 405. (120 HP @ 5500 RPM). In normal driving conditions, 1980 Mercedes-Benz 500 should accelerate faster than 1992 Peugeot 405. With that said, vehicle weight also plays an important factor in acceleration. 1980 Mercedes-Benz 500 weights approximately 395 kg more than 1992 Peugeot 405. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1980 Mercedes-Benz 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Mercedes-Benz 500. However, in wet, icy, snow, or gravel driving conditions, 1992 Peugeot 405, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Mercedes-Benz 500 (402 Nm @ 3200 RPM) has 232 more torque (in Nm) than 1992 Peugeot 405. (170 Nm @ 4500 RPM). This means 1980 Mercedes-Benz 500 will have an easier job in driving up hills or pulling heavy equipment than 1992 Peugeot 405. 1980 Mercedes-Benz 500 has automatic transmission and 1992 Peugeot 405 has manual transmission. 1992 Peugeot 405 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Mercedes-Benz 500 will be easier to drive especially in heavy traffic.
Compare all specifications:
1980 Mercedes-Benz 500 | 1992 Peugeot 405 | |
Make | Mercedes-Benz | Peugeot |
Model | 500 | 405 |
Year Released | 1980 | 1992 |
Engine Position | Front | Front |
Engine Size | 4972 cc | 1905 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 237 HP | 120 HP |
Engine RPM | 5000 RPM | 5500 RPM |
Torque | 402 Nm | 170 Nm |
Torque RPM | 3200 RPM | 4500 RPM |
Engine Bore Size | 96.5 mm | 83 mm |
Engine Stroke Size | 85 mm | 88 mm |
Engine Compression Ratio | 8.8:1 | 9.3:1 |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1515 kg | 1120 kg |
Vehicle Length | 4760 mm | 4400 mm |
Vehicle Width | 1800 mm | 1710 mm |
Vehicle Height | 1340 mm | 1550 mm |
Wheelbase Size | 2820 mm | 2710 mm |
Fuel Tank Capacity | 90 L | 70 L |