1980 Mercedes-Benz 500 vs. 2010 Fiat Panda
To start off, 2010 Fiat Panda is newer by 30 year(s). Which means there will be less support and parts availability for 1980 Mercedes-Benz 500. In addition, the cost of maintenance, including insurance, on 1980 Mercedes-Benz 500 would be higher. At 4,972 cc (8 cylinders), 1980 Mercedes-Benz 500 is equipped with a bigger engine. In terms of performance, 1980 Mercedes-Benz 500 (242 HP @ 4750 RPM) has 183 more horse power than 2010 Fiat Panda. (59 HP @ 5000 RPM). In normal driving conditions, 1980 Mercedes-Benz 500 should accelerate faster than 2010 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1980 Mercedes-Benz 500 weights approximately 680 kg more than 2010 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1980 Mercedes-Benz 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Mercedes-Benz 500. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Mercedes-Benz 500 (401 Nm @ 3200 RPM) has 299 more torque (in Nm) than 2010 Fiat Panda. (102 Nm @ 2500 RPM). This means 1980 Mercedes-Benz 500 will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Panda. 1980 Mercedes-Benz 500 has automatic transmission and 2010 Fiat Panda has manual transmission. 2010 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Mercedes-Benz 500 will be easier to drive especially in heavy traffic.
Compare all specifications:
1980 Mercedes-Benz 500 | 2010 Fiat Panda | |
Make | Mercedes-Benz | Fiat |
Model | 500 | Panda |
Year Released | 1980 | 2010 |
Engine Position | Front | Front |
Engine Size | 4972 cc | 1242 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 242 HP | 59 HP |
Engine RPM | 4750 RPM | 5000 RPM |
Torque | 401 Nm | 102 Nm |
Torque RPM | 3200 RPM | 2500 RPM |
Engine Compression Ratio | 8.8:1 | 9.8:1 |
Fuel Type | Gasoline | Gasoline |
Top Speed | 220 km/hour | 150 km/hour |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1540 kg | 860 kg |
Vehicle Length | 4400 mm | 3540 mm |
Vehicle Width | 1800 mm | 1580 mm |
Vehicle Height | 1310 mm | 1550 mm |
Wheelbase Size | 2470 mm | 2310 mm |
Fuel Tank Capacity | 90 L | 35 L |