1980 Mercury Lynx vs. 2003 Toyota Avensis

To start off, 2003 Toyota Avensis is newer by 23 year(s). Which means there will be less support and parts availability for 1980 Mercury Lynx. In addition, the cost of maintenance, including insurance, on 1980 Mercury Lynx would be higher. At 1,598 cc (4 cylinders), 2003 Toyota Avensis is equipped with a bigger engine. In terms of performance, 2003 Toyota Avensis (104 HP @ 6000 RPM) has 34 more horse power than 1980 Mercury Lynx. (70 HP @ 4600 RPM) In normal driving conditions, 2003 Toyota Avensis should accelerate faster than 1980 Mercury Lynx. With that said, vehicle weight also plays an important factor in acceleration. 2003 Toyota Avensis weights approximately 295 kg more than 1980 Mercury Lynx. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Toyota Avensis (147 Nm @ 3800 RPM) has 26 more torque (in Nm) than 1980 Mercury Lynx. (121 Nm @ 3000 RPM). This means 2003 Toyota Avensis will have an easier job in driving up hills or pulling heavy equipment than 1980 Mercury Lynx.

Compare all specifications:

1980 Mercury Lynx 2003 Toyota Avensis
Make Mercury Toyota
Model Lynx Avensis
Year Released 1980 2003
Engine Position Front Front
Engine Size 1597 cc 1598 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 70 HP 104 HP
Engine RPM 4600 RPM 6000 RPM
Torque 121 Nm 147 Nm
Torque RPM 3000 RPM 3800 RPM
Engine Bore Size 80 mm 79 mm
Engine Stroke Size 79.5 mm 81.5 mm
Engine Compression Ratio 8.8:1 10.5:1
Drive Type Front Front
Vehicle Weight 950 kg 1245 kg
Vehicle Length 4170 mm 4640 mm
Vehicle Width 1680 mm 1770 mm
Vehicle Height 1360 mm 1490 mm
Wheelbase Size 2400 mm 2610 mm