1980 Oldsmobile Cutlass vs. 2006 Opel Vectra

To start off, 2006 Opel Vectra is newer by 26 year(s). Which means there will be less support and parts availability for 1980 Oldsmobile Cutlass. In addition, the cost of maintenance, including insurance, on 1980 Oldsmobile Cutlass would be higher. At 4,343 cc (8 cylinders), 1980 Oldsmobile Cutlass is equipped with a bigger engine. In terms of performance, 2006 Opel Vectra (208 HP @ 6200 RPM) has 88 more horse power than 1980 Oldsmobile Cutlass. (120 HP @ 3600 RPM) In normal driving conditions, 2006 Opel Vectra should accelerate faster than 1980 Oldsmobile Cutlass. With that said, vehicle weight also plays an important factor in acceleration. 2006 Opel Vectra weights approximately 140 kg more than 1980 Oldsmobile Cutlass. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1980 Oldsmobile Cutlass is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Oldsmobile Cutlass. However, in wet, icy, snow, or gravel driving conditions, 2006 Opel Vectra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Oldsmobile Cutlass (305 Nm) has 5 more torque (in Nm) than 2006 Opel Vectra. (300 Nm). This means 1980 Oldsmobile Cutlass will have an easier job in driving up hills or pulling heavy equipment than 2006 Opel Vectra. 1980 Oldsmobile Cutlass has automatic transmission and 2006 Opel Vectra has manual transmission. 2006 Opel Vectra will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Oldsmobile Cutlass will be easier to drive especially in heavy traffic.

Compare all specifications: