1981 Audi 80 vs. 1971 GAZ 24

To start off, 1981 Audi 80 is newer by 10 year(s). Which means there will be less support and parts availability for 1971 GAZ 24. In addition, the cost of maintenance, including insurance, on 1971 GAZ 24 would be higher. At 2,111 cc (4 cylinders), 1971 GAZ 24 is equipped with a bigger engine. In terms of performance, 1971 GAZ 24 (62 HP @ 4500 RPM) has 3 more horse power than 1981 Audi 80. (59 HP @ 5600 RPM) In normal driving conditions, 1971 GAZ 24 should accelerate faster than 1981 Audi 80. With that said, vehicle weight also plays an important factor in acceleration. 1971 GAZ 24 weights approximately 560 kg more than 1981 Audi 80. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1971 GAZ 24 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1971 GAZ 24. However, in wet, icy, snow, or gravel driving conditions, 1981 Audi 80, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 GAZ 24 (124 Nm @ 2000 RPM) has 24 more torque (in Nm) than 1981 Audi 80. (100 Nm @ 3500 RPM). This means 1971 GAZ 24 will have an easier job in driving up hills or pulling heavy equipment than 1981 Audi 80.

Compare all specifications:

1981 Audi 80 1971 GAZ 24
Make Audi GAZ
Model 80 24
Year Released 1981 1971
Engine Position Front Front
Engine Size 1296 cc 2111 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 59 HP 62 HP
Engine RPM 5600 RPM 4500 RPM
Torque 100 Nm 124 Nm
Torque RPM 3500 RPM 2000 RPM
Fuel Type Gasoline Diesel
Drive Type Front Rear
Vehicle Weight 930 kg 1490 kg
Vehicle Length 4390 mm 4740 mm
Vehicle Width 1690 mm 1810 mm
Vehicle Height 1380 mm 1500 mm
Wheelbase Size 2550 mm 2810 mm