1981 BMW 725 vs. 1986 Peugeot 309

To start off, 1986 Peugeot 309 is newer by 5 year(s). Which means there will be less support and parts availability for 1981 BMW 725. In addition, the cost of maintenance, including insurance, on 1981 BMW 725 would be higher. At 2,493 cc (6 cylinders), 1981 BMW 725 is equipped with a bigger engine. In terms of performance, 1981 BMW 725 (148 HP @ 5500 RPM) has 42 more horse power than 1986 Peugeot 309. (106 HP @ 6000 RPM). In normal driving conditions, 1981 BMW 725 should accelerate faster than 1986 Peugeot 309.

Because 1981 BMW 725 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1981 BMW 725. However, in wet, icy, snow, or gravel driving conditions, 1986 Peugeot 309, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1981 BMW 725 (215 Nm @ 4000 RPM) has 52 more torque (in Nm) than 1986 Peugeot 309. (163 Nm @ 3000 RPM). This means 1981 BMW 725 will have an easier job in driving up hills or pulling heavy equipment than 1986 Peugeot 309.

Compare all specifications:

1981 BMW 725 1986 Peugeot 309
Make BMW Peugeot
Model 725 309
Year Released 1981 1986
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 2493 cc 1905 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 148 HP 106 HP
Engine RPM 5500 RPM 6000 RPM
Torque 215 Nm 163 Nm
Torque RPM 4000 RPM 3000 RPM
Engine Bore Size 86 mm 83.1 mm
Engine Stroke Size 71.6 mm 88 mm
Engine Compression Ratio 9.6:1 9.3:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Length 4870 mm 4060 mm
Vehicle Width 1810 mm 1640 mm
Vehicle Height 1440 mm 1390 mm
Wheelbase Size 2810 mm 2480 mm