1981 BMW 725 vs. 2008 Honda Civic

To start off, 2008 Honda Civic is newer by 27 year(s). Which means there will be less support and parts availability for 1981 BMW 725. In addition, the cost of maintenance, including insurance, on 1981 BMW 725 would be higher. At 2,493 cc (6 cylinders), 1981 BMW 725 is equipped with a bigger engine. In terms of performance, 1981 BMW 725 (148 HP @ 5500 RPM) has 40 more horse power than 2008 Honda Civic. (108 HP @ 5600 RPM). In normal driving conditions, 1981 BMW 725 should accelerate faster than 2008 Honda Civic.

Because 1981 BMW 725 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1981 BMW 725. However, in wet, icy, snow, or gravel driving conditions, 2008 Honda Civic, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1981 BMW 725 (215 Nm @ 4000 RPM) has 63 more torque (in Nm) than 2008 Honda Civic. (152 Nm @ 4300 RPM). This means 1981 BMW 725 will have an easier job in driving up hills or pulling heavy equipment than 2008 Honda Civic.

Compare all specifications:

1981 BMW 725 2008 Honda Civic
Make BMW Honda
Model 725 Civic
Year Released 1981 2008
Engine Position Front Front
Engine Size 2493 cc 1590 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 148 HP 108 HP
Engine RPM 5500 RPM 5600 RPM
Torque 215 Nm 152 Nm
Torque RPM 4000 RPM 4300 RPM
Engine Bore Size 86 mm 75 mm
Engine Stroke Size 71.6 mm 90 mm
Engine Compression Ratio 9.6:1 10.0:1
Fuel Type Gasoline Gasoline - Premium
Drive Type Rear Front
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Length 4870 mm 4290 mm
Vehicle Width 1810 mm 1720 mm
Vehicle Height 1440 mm 1500 mm
Wheelbase Size 2810 mm 2690 mm