1981 BMW 725 vs. 2010 Daihatsu Terios

To start off, 2010 Daihatsu Terios is newer by 29 year(s). Which means there will be less support and parts availability for 1981 BMW 725. In addition, the cost of maintenance, including insurance, on 1981 BMW 725 would be higher. At 2,493 cc (6 cylinders), 1981 BMW 725 is equipped with a bigger engine. In terms of performance, 1981 BMW 725 (148 HP @ 5500 RPM) has 44 more horse power than 2010 Daihatsu Terios. (104 HP @ 6000 RPM). In normal driving conditions, 1981 BMW 725 should accelerate faster than 2010 Daihatsu Terios.

Because 2010 Daihatsu Terios is four wheel drive (4WD), it will have significant more traction and grip than 1981 BMW 725. In wet, icy, snow, or gravel driving conditions, 2010 Daihatsu Terios will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1981 BMW 725 (215 Nm @ 4000 RPM) has 75 more torque (in Nm) than 2010 Daihatsu Terios. (140 Nm @ 4400 RPM). This means 1981 BMW 725 will have an easier job in driving up hills or pulling heavy equipment than 2010 Daihatsu Terios.

Compare all specifications:

1981 BMW 725 2010 Daihatsu Terios
Make BMW Daihatsu
Model 725 Terios
Year Released 1981 2010
Body Type Sedan SUV
Engine Position Front Front
Engine Size 2493 cc 1495 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 148 HP 104 HP
Engine RPM 5500 RPM 6000 RPM
Torque 215 Nm 140 Nm
Torque RPM 4000 RPM 4400 RPM
Engine Bore Size 86 mm 72.1 mm
Engine Stroke Size 71.6 mm 91.8 mm
Engine Compression Ratio 9.6:1 10.0:1
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Length 4870 mm 4060 mm
Vehicle Width 1810 mm 1750 mm
Vehicle Height 1440 mm 1700 mm
Wheelbase Size 2810 mm 2590 mm