1981 BMW 725 vs. 2012 Holden Captiva
To start off, 2012 Holden Captiva is newer by 31 year(s). Which means there will be less support and parts availability for 1981 BMW 725. In addition, the cost of maintenance, including insurance, on 1981 BMW 725 would be higher. At 2,493 cc (6 cylinders), 1981 BMW 725 is equipped with a bigger engine. In terms of performance, both vehicles can yield 148 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar.
Because 2012 Holden Captiva is four wheel drive (4WD), it will have significant more traction and grip than 1981 BMW 725. In wet, icy, snow, or gravel driving conditions, 2012 Holden Captiva will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Holden Captiva (320 Nm @ 2000 RPM) has 105 more torque (in Nm) than 1981 BMW 725. (215 Nm @ 4000 RPM). This means 2012 Holden Captiva will have an easier job in driving up hills or pulling heavy equipment than 1981 BMW 725.
Compare all specifications:
1981 BMW 725 | 2012 Holden Captiva | |
Make | BMW | Holden |
Model | 725 | Captiva |
Year Released | 1981 | 2012 |
Body Type | Sedan | SUV |
Engine Position | Front | Front |
Engine Size | 2493 cc | 1990 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 148 HP | 148 HP |
Engine RPM | 5500 RPM | 4000 RPM |
Torque | 215 Nm | 320 Nm |
Torque RPM | 4000 RPM | 2000 RPM |
Engine Bore Size | 86 mm | 83 mm |
Engine Stroke Size | 71.6 mm | 92 mm |
Engine Compression Ratio | 9.6:1 | 17.5:1 |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | 4WD |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Length | 4870 mm | 4580 mm |
Vehicle Width | 1810 mm | 1860 mm |
Vehicle Height | 1440 mm | 1710 mm |
Wheelbase Size | 2810 mm | 2710 mm |