1981 BMW 745 vs. 2003 Peugeot 607

To start off, 2003 Peugeot 607 is newer by 22 year(s). Which means there will be less support and parts availability for 1981 BMW 745. In addition, the cost of maintenance, including insurance, on 1981 BMW 745 would be higher. At 3,430 cc (6 cylinders), 1981 BMW 745 is equipped with a bigger engine. In terms of performance, 1981 BMW 745 (252 HP @ 5200 RPM) has 92 more horse power than 2003 Peugeot 607. (160 HP @ 5800 RPM). In normal driving conditions, 1981 BMW 745 should accelerate faster than 2003 Peugeot 607. With that said, vehicle weight also plays an important factor in acceleration. 1981 BMW 745 weights approximately 140 kg more than 2003 Peugeot 607. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1981 BMW 745 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1981 BMW 745. However, in wet, icy, snow, or gravel driving conditions, 2003 Peugeot 607, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1981 BMW 745 (380 Nm @ 2200 RPM) has 163 more torque (in Nm) than 2003 Peugeot 607. (217 Nm @ 3900 RPM). This means 1981 BMW 745 will have an easier job in driving up hills or pulling heavy equipment than 2003 Peugeot 607. 2003 Peugeot 607 has automatic transmission and 1981 BMW 745 has manual transmission. 1981 BMW 745 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Peugeot 607 will be easier to drive especially in heavy traffic.

Compare all specifications:

1981 BMW 745 2003 Peugeot 607
Make BMW Peugeot
Model 745 607
Year Released 1981 2003
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 3430 cc 2230 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 252 HP 160 HP
Engine RPM 5200 RPM 5800 RPM
Torque 380 Nm 217 Nm
Torque RPM 2200 RPM 3900 RPM
Engine Bore Size 92 mm 86 mm
Engine Stroke Size 86 mm 96 mm
Engine Compression Ratio 8.0:1 11.0:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1590 kg 1450 kg
Vehicle Length 4870 mm 4880 mm
Vehicle Width 1810 mm 1840 mm
Vehicle Height 1440 mm 1470 mm
Wheelbase Size 2800 mm 2810 mm
Fuel Tank Capacity 100 L 66 L