1981 Fiat 127 vs. 1959 Triumph Herald

To start off, 1981 Fiat 127 is newer by 22 year(s). Which means there will be less support and parts availability for 1959 Triumph Herald. In addition, the cost of maintenance, including insurance, on 1959 Triumph Herald would be higher. At 948 cc (4 cylinders), 1959 Triumph Herald is equipped with a bigger engine. In terms of performance, 1981 Fiat 127 (44 HP @ 5600 RPM) has 6 more horse power than 1959 Triumph Herald. (38 HP @ 4500 RPM). In normal driving conditions, 1981 Fiat 127 should accelerate faster than 1959 Triumph Herald. With that said, vehicle weight also plays an important factor in acceleration. 1959 Triumph Herald weights approximately 57 kg more than 1981 Fiat 127.

Because 1959 Triumph Herald is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1959 Triumph Herald. However, in wet, icy, snow, or gravel driving conditions, 1981 Fiat 127, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1959 Triumph Herald (83 Nm) has 18 more torque (in Nm) than 1981 Fiat 127. (65 Nm). This means 1959 Triumph Herald will have an easier job in driving up hills or pulling heavy equipment than 1981 Fiat 127.

Compare all specifications:

1981 Fiat 127 1959 Triumph Herald
Make Fiat Triumph
Model 127 Herald
Year Released 1981 1959
Engine Position Front Front
Engine Size 903 cc 948 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 44 HP 38 HP
Engine RPM 5600 RPM 4500 RPM
Torque 65 Nm 83 Nm
Engine Bore Size 65 mm 63 mm
Engine Stroke Size 67.7 mm 76 mm
Drive Type Front Rear
Transmission Type Manual Manual
Vehicle Weight 705 kg 762 kg
Vehicle Length 3650 mm 3890 mm
Vehicle Width 1530 mm 1530 mm
Vehicle Height 1370 mm 1330 mm
Wheelbase Size 2230 mm 2330 mm