1981 Holden Commodore vs. 2013 Fiat 500

To start off, 2013 Fiat 500 is newer by 32 year(s). Which means there will be less support and parts availability for 1981 Holden Commodore. In addition, the cost of maintenance, including insurance, on 1981 Holden Commodore would be higher. At 4,142 cc (8 cylinders), 1981 Holden Commodore is equipped with a bigger engine. In terms of performance, 1981 Holden Commodore (134 HP @ 4200 RPM) has 33 more horse power than 2013 Fiat 500. (101 HP @ 6500 RPM). In normal driving conditions, 1981 Holden Commodore should accelerate faster than 2013 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 1981 Holden Commodore weights approximately 244 kg more than 2013 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1981 Holden Commodore is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1981 Holden Commodore. However, in wet, icy, snow, or gravel driving conditions, 2013 Fiat 500, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1981 Holden Commodore (270 Nm @ 2000 RPM) has 137 more torque (in Nm) than 2013 Fiat 500. (133 Nm @ 4000 RPM). This means 1981 Holden Commodore will have an easier job in driving up hills or pulling heavy equipment than 2013 Fiat 500. 1981 Holden Commodore has automatic transmission and 2013 Fiat 500 has manual transmission. 2013 Fiat 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1981 Holden Commodore will be easier to drive especially in heavy traffic.

Compare all specifications:

1981 Holden Commodore 2013 Fiat 500
Make Holden Fiat
Model Commodore 500
Year Released 1981 2013
Body Type Sedan Hatchback
Engine Position Front Front
Engine Size 4142 cc 1368 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 134 HP 101 HP
Engine RPM 4200 RPM 6500 RPM
Torque 270 Nm 133 Nm
Torque RPM 2000 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Automatic 5-speed manual
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 3 doors
Vehicle Weight 1350 kg 1106 kg
Vehicle Length 4710 mm 3547 mm
Vehicle Width 1730 mm 1627 mm
Vehicle Height 1370 mm 1520 mm
Wheelbase Size 2670 mm 2300 mm