1981 Holden Gemini vs. 1956 Holden FE
To start off, 1981 Holden Gemini is newer by 25 year(s). Which means there will be less support and parts availability for 1956 Holden FE. In addition, the cost of maintenance, including insurance, on 1956 Holden FE would be higher. At 2,166 cc (6 cylinders), 1956 Holden FE is equipped with a bigger engine. In terms of performance, 1956 Holden FE (60 HP @ 4000 RPM) has 7 more horse power than 1981 Holden Gemini. (53 HP @ 5000 RPM) In normal driving conditions, 1956 Holden FE should accelerate faster than 1981 Holden Gemini. With that said, vehicle weight also plays an important factor in acceleration. 1981 Holden Gemini weights approximately 70 kg more than 1956 Holden FE.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Holden FE (151 Nm @ 1200 RPM) has 46 more torque (in Nm) than 1981 Holden Gemini. (105 Nm @ 2000 RPM). This means 1956 Holden FE will have an easier job in driving up hills or pulling heavy equipment than 1981 Holden Gemini.
Compare all specifications:
1981 Holden Gemini | 1956 Holden FE | |
Make | Holden | Holden |
Model | Gemini | FE |
Year Released | 1981 | 1956 |
Engine Position | Front | Front |
Engine Size | 1815 cc | 2166 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 53 HP | 60 HP |
Engine RPM | 5000 RPM | 4000 RPM |
Torque | 105 Nm | 151 Nm |
Torque RPM | 2000 RPM | 1200 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1050 kg | 980 kg |
Vehicle Length | 4240 mm | 4480 mm |
Vehicle Width | 1580 mm | 1710 mm |
Vehicle Height | 1340 mm | 1560 mm |
Wheelbase Size | 2410 mm | 2670 mm |