1981 Mercury Lynx vs. 2001 Toyota Progress NC 300
To start off, 2001 Toyota Progress NC 300 is newer by 20 year(s). Which means there will be less support and parts availability for 1981 Mercury Lynx. In addition, the cost of maintenance, including insurance, on 1981 Mercury Lynx would be higher. At 2,997 cc (6 cylinders), 2001 Toyota Progress NC 300 is equipped with a bigger engine. In terms of performance, 2001 Toyota Progress NC 300 (213 HP @ 6000 RPM) has 143 more horse power than 1981 Mercury Lynx. (70 HP @ 4600 RPM) In normal driving conditions, 2001 Toyota Progress NC 300 should accelerate faster than 1981 Mercury Lynx. With that said, vehicle weight also plays an important factor in acceleration. 2001 Toyota Progress NC 300 weights approximately 530 kg more than 1981 Mercury Lynx. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2001 Toyota Progress NC 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2001 Toyota Progress NC 300. However, in wet, icy, snow, or gravel driving conditions, 1981 Mercury Lynx, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2001 Toyota Progress NC 300 (298 Nm @ 3800 RPM) has 177 more torque (in Nm) than 1981 Mercury Lynx. (121 Nm @ 3000 RPM). This means 2001 Toyota Progress NC 300 will have an easier job in driving up hills or pulling heavy equipment than 1981 Mercury Lynx.
Compare all specifications:
| 1981 Mercury Lynx | 2001 Toyota Progress NC 300 | |
| Make | Mercury | Toyota |
| Model | Lynx | Progress NC 300 |
| Year Released | 1981 | 2001 |
| Engine Position | Front | Front |
| Engine Size | 1598 cc | 2997 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 70 HP | 213 HP |
| Engine RPM | 4600 RPM | 6000 RPM |
| Torque | 121 Nm | 298 Nm |
| Torque RPM | 3000 RPM | 3800 RPM |
| Engine Bore Size | 80 mm | 86 mm |
| Engine Stroke Size | 79.5 mm | 86 mm |
| Engine Compression Ratio | 8.8:1 | 10.5:1 |
| Drive Type | Front | Rear |
| Vehicle Weight | 950 kg | 1480 kg |
| Vehicle Length | 4170 mm | 4510 mm |
| Vehicle Width | 1680 mm | 1710 mm |
| Vehicle Height | 1360 mm | 1440 mm |
| Wheelbase Size | 2400 mm | 2790 mm |
