1981 Nissan Stanza vs. 2010 Volkswagen Passat

To start off, 2010 Volkswagen Passat is newer by 29 year(s). Which means there will be less support and parts availability for 1981 Nissan Stanza. In addition, the cost of maintenance, including insurance, on 1981 Nissan Stanza would be higher. At 2,000 cc (4 cylinders), 2010 Volkswagen Passat is equipped with a bigger engine. In terms of performance, 2010 Volkswagen Passat (200 HP @ 5100 RPM) has 119 more horse power than 1981 Nissan Stanza. (81 HP @ 5200 RPM) In normal driving conditions, 2010 Volkswagen Passat should accelerate faster than 1981 Nissan Stanza. With that said, vehicle weight also plays an important factor in acceleration. 2010 Volkswagen Passat weights approximately 687 kg more than 1981 Nissan Stanza. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Volkswagen Passat (280 Nm @ 1800 RPM) has 150 more torque (in Nm) than 1981 Nissan Stanza. (130 Nm @ 3200 RPM). This means 2010 Volkswagen Passat will have an easier job in driving up hills or pulling heavy equipment than 1981 Nissan Stanza.

Compare all specifications:

1981 Nissan Stanza 2010 Volkswagen Passat
Make Nissan Volkswagen
Model Stanza Passat
Year Released 1981 2010
Engine Position Front Front
Engine Size 1598 cc 2000 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 81 HP 200 HP
Engine RPM 5200 RPM 5100 RPM
Torque 130 Nm 280 Nm
Torque RPM 3200 RPM 1800 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Front
Transmission Type Manual Manual
Vehicle Weight 880 kg 1567 kg
Vehicle Length 4310 mm 4775 mm
Vehicle Width 1670 mm 1821 mm
Vehicle Height 1390 mm 1516 mm
Wheelbase Size 2480 mm 2710 mm