1982 Austin Ambassador vs. 1983 Holden Statesman

To start off, 1983 Holden Statesman is newer by 1 year(s). Which means there will be less support and parts availability for 1982 Austin Ambassador. In addition, the cost of maintenance, including insurance, on 1982 Austin Ambassador would be higher. At 5,042 cc (8 cylinders), 1983 Holden Statesman is equipped with a bigger engine. In terms of performance, 1983 Holden Statesman (169 HP @ 4400 RPM) has 78 more horse power than 1982 Austin Ambassador. (91 HP @ 4900 RPM) In normal driving conditions, 1983 Holden Statesman should accelerate faster than 1982 Austin Ambassador. With that said, vehicle weight also plays an important factor in acceleration. 1983 Holden Statesman weights approximately 505 kg more than 1982 Austin Ambassador. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1983 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1983 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 1982 Austin Ambassador, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1983 Holden Statesman (361 Nm @ 2800 RPM) has 206 more torque (in Nm) than 1982 Austin Ambassador. (155 Nm @ 2750 RPM). This means 1983 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 1982 Austin Ambassador. 1983 Holden Statesman has automatic transmission and 1982 Austin Ambassador has manual transmission. 1982 Austin Ambassador will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1983 Holden Statesman will be easier to drive especially in heavy traffic.

Compare all specifications:

1982 Austin Ambassador 1983 Holden Statesman
Make Austin Holden
Model Ambassador Statesman
Year Released 1982 1983
Engine Position Front Front
Engine Size 1994 cc 5042 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line in-line
Horse Power 91 HP 169 HP
Engine RPM 4900 RPM 4400 RPM
Torque 155 Nm 361 Nm
Torque RPM 2750 RPM 2800 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Automatic
Vehicle Weight 1215 kg 1720 kg
Vehicle Length 4560 mm 5160 mm
Vehicle Width 1740 mm 1910 mm
Vehicle Height 1410 mm 1410 mm
Wheelbase Size 2680 mm 2900 mm