1982 Chrysler E vs. 1985 Holden Barina
To start off, 1985 Holden Barina is newer by 3 year(s). Which means there will be less support and parts availability for 1982 Chrysler E. In addition, the cost of maintenance, including insurance, on 1982 Chrysler E would be higher. At 2,213 cc (4 cylinders), 1982 Chrysler E is equipped with a bigger engine. In terms of performance, 1982 Chrysler E (141 HP @ 5600 RPM) has 82 more horse power than 1985 Holden Barina. (59 HP @ 5500 RPM). In normal driving conditions, 1982 Chrysler E should accelerate faster than 1985 Holden Barina. With that said, vehicle weight also plays an important factor in acceleration. 1982 Chrysler E weights approximately 620 kg more than 1985 Holden Barina. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1982 Chrysler E (228 Nm @ 3600 RPM) has 143 more torque (in Nm) than 1985 Holden Barina. (85 Nm @ 3500 RPM). This means 1982 Chrysler E will have an easier job in driving up hills or pulling heavy equipment than 1985 Holden Barina.
Compare all specifications:
1982 Chrysler E | 1985 Holden Barina | |
Make | Chrysler | Holden |
Model | E | Barina |
Year Released | 1982 | 1985 |
Engine Position | Front | Front |
Engine Size | 2213 cc | 993 cc |
Engine Cylinders | 4 cylinders | 3 cylinders |
Engine Type | in-line | in-line |
Horse Power | 141 HP | 59 HP |
Engine RPM | 5600 RPM | 5500 RPM |
Torque | 228 Nm | 85 Nm |
Torque RPM | 3600 RPM | 3500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Vehicle Weight | 1245 kg | 625 kg |
Vehicle Length | 4720 mm | 3780 mm |
Vehicle Width | 1740 mm | 1550 mm |
Vehicle Height | 1350 mm | 1360 mm |
Wheelbase Size | 2630 mm | 2250 mm |