1982 Ferrari 208 vs. 2010 Alpina B3
To start off, 2010 Alpina B3 is newer by 28 year(s). Which means there will be less support and parts availability for 1982 Ferrari 208. In addition, the cost of maintenance, including insurance, on 1982 Ferrari 208 would be higher. At 3,000 cc (6 cylinders), 2010 Alpina B3 is equipped with a bigger engine. In terms of performance, 2010 Alpina B3 (355 HP @ 5500 RPM) has 135 more horse power than 1982 Ferrari 208. (220 HP @ 7000 RPM) In normal driving conditions, 2010 Alpina B3 should accelerate faster than 1982 Ferrari 208. With that said, vehicle weight also plays an important factor in acceleration. 2010 Alpina B3 weights approximately 328 kg more than 1982 Ferrari 208. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Alpina B3 is four wheel drive (4WD), it will have significant more traction and grip than 1982 Ferrari 208. In wet, icy, snow, or gravel driving conditions, 2010 Alpina B3 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Alpina B3 (500 Nm @ 3800 RPM) has 259 more torque (in Nm) than 1982 Ferrari 208. (241 Nm @ 4800 RPM). This means 2010 Alpina B3 will have an easier job in driving up hills or pulling heavy equipment than 1982 Ferrari 208. 2010 Alpina B3 has automatic transmission and 1982 Ferrari 208 has manual transmission. 1982 Ferrari 208 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Alpina B3 will be easier to drive especially in heavy traffic.
Compare all specifications:
1982 Ferrari 208 | 2010 Alpina B3 | |
Make | Ferrari | Alpina |
Model | 208 | B3 |
Year Released | 1982 | 2010 |
Engine Position | Middle | Front |
Engine Size | 1990 cc | 3000 cc |
Engine Cylinders | 8 cylinders | 6 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 220 HP | 355 HP |
Engine RPM | 7000 RPM | 5500 RPM |
Torque | 241 Nm | 500 Nm |
Torque RPM | 4800 RPM | 3800 RPM |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1232 kg | 1560 kg |
Vehicle Length | 4240 mm | 4480 mm |
Vehicle Width | 1730 mm | 1750 mm |
Vehicle Height | 1130 mm | 1420 mm |
Wheelbase Size | 2350 mm | 2730 mm |