1982 Ford Granada vs. 1977 Holden Kingswood

To start off, 1982 Ford Granada is newer by 5 year(s). Which means there will be less support and parts availability for 1977 Holden Kingswood. In addition, the cost of maintenance, including insurance, on 1977 Holden Kingswood would be higher. At 3,298 cc (6 cylinders), 1977 Holden Kingswood is equipped with a bigger engine. In terms of performance, 1977 Holden Kingswood (109 HP @ 4000 RPM) has 11 more horse power than 1982 Ford Granada. (98 HP @ 5500 RPM) In normal driving conditions, 1977 Holden Kingswood should accelerate faster than 1982 Ford Granada. With that said, vehicle weight also plays an important factor in acceleration. 1977 Holden Kingswood weights approximately 40 kg more than 1982 Ford Granada. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Holden Kingswood (258 Nm @ 1600 RPM) has 107 more torque (in Nm) than 1982 Ford Granada. (151 Nm @ 3800 RPM). This means 1977 Holden Kingswood will have an easier job in driving up hills or pulling heavy equipment than 1982 Ford Granada.

Compare all specifications:

1982 Ford Granada 1977 Holden Kingswood
Make Ford Holden
Model Granada Kingswood
Year Released 1982 1977
Engine Position Front Front
Engine Size 1993 cc 3298 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 98 HP 109 HP
Engine RPM 5500 RPM 4000 RPM
Torque 151 Nm 258 Nm
Torque RPM 3800 RPM 1600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 1300 kg 1340 kg
Vehicle Length 4890 mm 4850 mm
Vehicle Width 1820 mm 1900 mm
Vehicle Height 1430 mm 1410 mm
Wheelbase Size 2780 mm 2830 mm