1982 Holden Camira vs. 2010 BMW 325

To start off, 2010 BMW 325 is newer by 28 year(s). Which means there will be less support and parts availability for 1982 Holden Camira. In addition, the cost of maintenance, including insurance, on 1982 Holden Camira would be higher. At 2,494 cc (6 cylinders), 2010 BMW 325 is equipped with a bigger engine. In terms of performance, 2010 BMW 325 (194 HP @ 4000 RPM) has 108 more horse power than 1982 Holden Camira. (86 HP @ 5800 RPM) In normal driving conditions, 2010 BMW 325 should accelerate faster than 1982 Holden Camira. With that said, vehicle weight also plays an important factor in acceleration. 2010 BMW 325 weights approximately 556 kg more than 1982 Holden Camira. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 BMW 325 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 BMW 325. However, in wet, icy, snow, or gravel driving conditions, 1982 Holden Camira, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 BMW 325 (400 Nm @ 1300 RPM) has 275 more torque (in Nm) than 1982 Holden Camira. (125 Nm @ 3800 RPM). This means 2010 BMW 325 will have an easier job in driving up hills or pulling heavy equipment than 1982 Holden Camira. 2010 BMW 325 has automatic transmission and 1982 Holden Camira has manual transmission. 1982 Holden Camira will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 BMW 325 will be easier to drive especially in heavy traffic.

Compare all specifications:

1982 Holden Camira 2010 BMW 325
Make Holden BMW
Model Camira 325
Year Released 1982 2010
Engine Position Front Front
Engine Size 1598 cc 2494 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 86 HP 194 HP
Engine RPM 5800 RPM 4000 RPM
Torque 125 Nm 400 Nm
Torque RPM 3800 RPM 1300 RPM
Fuel Type Gasoline Diesel
Drive Type Front Rear
Transmission Type Manual Automatic
Vehicle Weight 1040 kg 1596 kg
Vehicle Length 4410 mm 4590 mm
Vehicle Width 1690 mm 1790 mm
Vehicle Height 1370 mm 1380 mm
Wheelbase Size 2580 mm 2770 mm