1982 Reliant Scimitar vs. 1980 Subaru Rex

To start off, 1982 Reliant Scimitar is newer by 2 year(s). Which means there will be less support and parts availability for 1980 Subaru Rex. In addition, the cost of maintenance, including insurance, on 1980 Subaru Rex would be higher. At 2,792 cc (6 cylinders), 1982 Reliant Scimitar is equipped with a bigger engine. In terms of performance, 1982 Reliant Scimitar (135 HP @ 5200 RPM) has 106 more horse power than 1980 Subaru Rex. (29 HP @ 6200 RPM). In normal driving conditions, 1982 Reliant Scimitar should accelerate faster than 1980 Subaru Rex. With that said, vehicle weight also plays an important factor in acceleration. 1982 Reliant Scimitar weights approximately 730 kg more than 1980 Subaru Rex. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1982 Reliant Scimitar (206 Nm @ 3000 RPM) has 163 more torque (in Nm) than 1980 Subaru Rex. (43 Nm @ 3500 RPM). This means 1982 Reliant Scimitar will have an easier job in driving up hills or pulling heavy equipment than 1980 Subaru Rex.

Compare all specifications:

1982 Reliant Scimitar 1980 Subaru Rex
Make Reliant Subaru
Model Scimitar Rex
Year Released 1982 1980
Engine Position Front Rear
Engine Size 2792 cc 544 cc
Engine Cylinders 6 cylinders 2 cylinders
Engine Type V in-line
Horse Power 135 HP 29 HP
Engine RPM 5200 RPM 6200 RPM
Torque 206 Nm 43 Nm
Torque RPM 3000 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1265 kg 535 kg
Vehicle Length 4440 mm 3000 mm
Vehicle Width 1720 mm 1300 mm
Vehicle Height 1330 mm 1290 mm
Wheelbase Size 2640 mm 1930 mm